IRA-E900ST1 Murata Manufacturing Co., Ltd, IRA-E900ST1 Datasheet - Page 11

• Manufacturer Part Number: IRA-E900ST1
• Description: Pyroelectric Infrared Sensors
• Manufacturer: Murata Manufacturing Co., Ltd

Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
▊
IRS series, IRA-E700 series, IRA-E900 series
High Temperature
Low Temperature
Humidity
Heat Cycle
Vibration
Shock
Soldering Heat
Hermetic Sealing
Reliability Test
Item
100℃ for 500 hrs.
— 40℃ for 500 hrs.
60℃, 95% RH for 500 hrs.
20 times of following cycle.
— 25℃, 30 min. ⇨Room temp., 30 min.⇩
⇧Room temp., 30 min. ⇦55℃, 30 min.
Apply vibration of amplitude of 1.5mm with 10 to 55Hz band to each of 3
perpendicular directions for 60 min.
Apply shock of 100G sine wave by standard shock tester to each of 3
perpendicular directions.
Immerse up to 3.0mm from can case in solder bath of 260±5℃ for 10±1 s.
Conform to MIL-STD-202F chapter 112D, condition D.
Immerse in fluorocarbon bath (FC-40) of 125±5℃ for 20 s.
Pyroelectric Infrared Sensor IRS/IRA Series Characteristics Data
Test Conditions
After test completion, leave for three hours in
normal humidity temperature conditions, and
then measure.
1. External appearance:
2. Sensitivity:
3. Noise:
No generation of bubbles
No significant damage
Tolerance within 20% deviation from original
value
Maximum tolerance +100mV of original value
Criteria
P17E.pdf
9
10.11.1
5