SSC-ERT801 Seoul Semiconductor, SSC-ERT801 Datasheet - Page 7
![no-image](/images/no-image-200.jpg)
SSC-ERT801
Manufacturer Part Number
SSC-ERT801
Description
TOP LED DEVICE
Manufacturer
Seoul Semiconductor
Datasheet
1.SSC-ERT801.pdf
(8 pages)
www.DataSheet4U.com
SSC-QP-0401-06(REV.1.2)
9. Precaution for use
(1) Storage
with a desiccant. Otherwise, to store them in the following environment is recommended.
(2) Attention after open.
transmission efficiency, causing the light intensity to drop. Attention in followed;
(3) In the case of more than 1 week passed after opening or change color of indicator on desiccant,
components shall be dried 10-12hr. at 60±5ºC.
(4) In the case of that the components is humided, the components shall be dried;
(5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to
normal temperature after soldering.
(6) Quick cooling shall be avoided.
(7) Components shall not be mounted on warped direction of L/F.
(8) Anti radioactive ray design is not considered for the products.
(9) This device should not be used in any type of fluid such as water, oil, organic solvent etc. When
washing is required, IPA should be used.
(10) When the LEDs are illuminating, operating current should be decided after considering the ambient
maximum temperature.
(11) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more
after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage.
(12) The LEDs must be soldered within seven days after opening the moisture-proof packing.
(13) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry
place.
LED is correspond to SMD, when LED be soldered dip, interfacial separation may affect the light
In order to avoid the absorption of moisture, it is recommended to store in a dry box (or a desiccator)
* The LED is classified to Class 3 by JEDEC (J-STD-020A and J-STD-033).
Temperature : 5ºC ~30ºC Humidity : maximum 60%HR
a. After opened and mounted the soldering shall be quickly.
b. Keeping of a fraction
24Hr at 80±5ºC or 12Hr at 100±5ºC.
Temperature : 5 ~ 40ºC Humidity : less than 30%
148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea
SEOUL SEMICONDUCTOR CO.,LTD.
Phone : 82-2-2106-7305~6
- 7/8 -
SSC-ERT801