T170XW01V1 AU_OPTRONICS, T170XW01V1 Datasheet - Page 6

• Manufacturer Part Number: T170XW01V1
• Description: COLOR TFT LCD MODULE
• Manufacturer: AU_OPTRONICS

1.0 Handling Precautions
(C) Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved.
No Reproduction and Redistribution Allowed.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. After installation of the TFT-LCD module into an enclosure (LCD monitor housing, for
Since front polarizer is easily damaged, pay attention not to scratch it.
Be sure to turn off power supply when inserting or disconnecting from input connector.
Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
Do not open nor modify the Module Assembly.
Do not press the reflector sheet at the back of the module to any directions.
At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT-LCD module.
example), do not twist nor bend the TFT -LCD module even momentary. At designing
the enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT -LCD module from outside. Otherwise the TFT -LCD module may
be damaged.
Page 5 of 29
M170XW01 V.1 ver0.1