CMP389F55563 World Products, Inc., CMP389F55563 Datasheet - Page 10

• Manufacturer Part Number: CMP389F55563
• Description: Ac And Pulse Metallized Polypropylene Film Capacitors
• Manufacturer: World Products, Inc.

Pilkor components
AC and Pulse
Metallized Polypropylene film capacitors
CONSTRUCTION
Description ;
. Low - inductive wound cell of metallized polypropylene (PP) film.
. Potted with blue epoxy resin in a blue flame-retardant polypropylene case.
. Radial leads, tin-coated.
. Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board.
MOUNTING
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoilers
are designed for mounting on printed-circuit boards by means of automatic insertion machines.
. For pitches of 15 mm the capacitors shall be mechanically fixed by the leads.
. For larger pitches the capacitors shall be mounted in the same way and the body clamped.
SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD
The maximum length and width of film capacitors are shown in the following drawing ;
- Eccentricity as in drawing.
- Product height with seating plane as given by IEC 60717 as reference : h
NORMAL USE
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATIONAND SHOCK
The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.
Eccentricity
Imax = I +0.3 mm
MKP mtallized polypropylene film
metal spray layer
connecting wire
170
b max = b + 0.3mm
max
≤ h+0.3mm
PCMP 389