RL28-8-H-700-IR-47-74 Pepperl+Fuchs, RL28-8-H-700-IR-47-74 Datasheet - Page 3

• Manufacturer Part Number: RL28-8-H-700-IR-47-74
• Description: Background Suppression Sensor
• Manufacturer: Pepperl+Fuchs

Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
Mounting instructions:
There are two bore holes for mounting the sensor with M5 bolts. The base surface must be flat to avoid distorting the housing
during mounting. It is advisable to secure the bolts with spring washers so that the sensor does not become misaligned.
Outdoor installation:
The sensor must be protected against rain and splash-water, possibly must a cover be installed.
Adjustment:
Adjust the sensor on the background. After the connecting to the power supply the green LED illuminates. In case the yellow
LEDs illuminate too, the detection range needs to be reduced with the detection range adjuster, until the yellow LEDs is switched
off. If the object is moved into the detection range the yellow LEDs illuminates.
Driving inductive loads:
If the sensor are used to drive inductive loads, the following safety procedures must be carried out:
For operating voltage of 10 … 30V DC: fit a protection diode, max. 200 mA
Additional information
Background suppression sensor
[e-mail]
USA: [phone]
Characteristic response curve
-10
Offset Y [mm]
10
-2
-4
-6
-8
8
6
4
2
0
0
x
Germany: [phone]
[e-mail]
200
400
white 90 %
grey 18 %
black 6 %
[e-mail]
Singapore: [phone]
Copyright Pepperl+Fuchs
600
RL(K)28-8-H-700-IR
Distance X [mm]
800
RL28-8-H-700-IR/47/74
3