IDT82V3280 Integrated Device Technology, IDT82V3280 Datasheet - Page 110

• Manufacturer Part Number: IDT82V3280
• Description: Wan Pll
• Manufacturer: Integrated Device Technology

IN3_IN4_STS - Input Clock 3 & 4 Status
Address: 44H
Type: Read
Default Value: X110X110
Programming Information
IDT82V3280
Bit
7
6
5
4
3
2
1
0
7
-
IN4_FREQ_HAR
IN4_NO_ACTIVITY_ALARM
IN3_NO_ACTIVITY_ALARM
IN4_FREQ_HARD_ALARM
IN3_FREQ_HARD_ALARM
D_ALARM
IN4_PH_LOCK_ALARM
IN3_PH_LOCK_ALARM
6
Name
-
-
IN4_NO_ACTIVI
TY_ALARM
5
Reserved.
This bit indicates whether IN4 is in frequency hard alarm status.
0: No frequency hard alarm.
1: In frequency hard alarm status. (default)
This bit indicates whether IN4 is in no-activity alarm status.
0: No no-activity alarm.
1: In no-activity alarm status. (default)
This bit indicates whether IN4 is in phase lock alarm status.
0: No phase lock alarm. (default)
1: In phase lock alarm status.
If the PH_ALARM_TIMEOUT bit (b5, 09H) is ‘0’, this bit is cleared by writing ‘1’ to this bit; if the
PH_ALARM_TIMEOUT bit (b5, 09H) is ‘1’, this bit is cleared after a period ( = TIME_OUT_VALUE[5:0] (b5~0,
08H) X MULTI_FACTOR[1:0] (b7~6, 08H) in second ) which starts from when the alarm is raised.
Reserved.
This bit indicates whether IN3 is in frequency hard alarm status.
0: No frequency hard alarm.
1: In frequency hard alarm status. (default)
This bit indicates whether IN3 is in no-activity alarm status.
0: No no-activity alarm.
1: In no-activity alarm status. (default)
This bit indicates whether IN3 is in phase lock alarm status.
0: No phase lock alarm. (default)
1: In phase lock alarm status.
If the PH_ALARM_TIMEOUT bit (b5, 09H) is ‘0’, this bit is cleared by writing ‘1’ to this bit; if the
PH_ALARM_TIMEOUT bit (b5, 09H) is ‘1’, this bit is cleared after a period ( = TIME_OUT_VALUE[5:0] (b5~0,
08H) X MULTI_FACTOR[1:0] (b7~6, 08H) in second ) which starts from when the alarm is raised.
IN4_PH_LOCK_
ALARM
4
110
3
-
IN3_FREQ_HAR
D_ALARM
Description
2
IN3_NO_ACTIVI
TY_ALARM
1
IN3_PH_LOCK_
June 19, 2006
ALARM
0
WAN PLL