AAT3167IFO-T1 Advanced Analog Technology, Inc., AAT3167IFO-T1 Datasheet

no-image

AAT3167IFO-T1

Manufacturer Part Number
AAT3167IFO-T1
Description
High Efficiency 1X/1.5X/2X Charge Pump for White LED Applications
Manufacturer
Advanced Analog Technology, Inc.
Datasheet
General Description
The AAT3167 is a low noise, constant frequency
charge pump DC/DC converter that uses a tri-
mode load switch (1X), fractional (1.5X), and dou-
bling (2X) conversion to maximize efficiency for
white LED applications. The AAT3167 is capable of
driving five LEDs for a total of 135mA from a 2.7V
to 5.5V input. The current sinks may be operated
individually or in parallel for driving higher current
LEDs. A low external parts count (two 1µF flying
capacitors and two small 1µF capacitors at IN and
OUTCP) make this part ideally suited for small,
battery-powered applications.
AnalogicTech's AS
Serial Control™) serial digital input is used to enable,
disable, and set current for each LED with a 16-level
logarithmic scale plus four low-current settings down
to 115µA. For optimized efficiency, low-current set-
tings require only 50µA of housekeeping current.
Each output of the AAT3167 is equipped with built-
in protection for output short circuit and auto-dis-
able for load short-circuit conditions. Built-in soft-
start circuitry prevents excessive inrush current
during start-up. A low-current shutdown feature dis-
connects the load from the input and reduces qui-
escent current to less than 1µA.
The AAT3167 is available in a Pb-free, space-sav-
ing, thermally-enhanced, 14-pin 3x3mm STDFN or
16-pin 4x4mm QFN package and is rated over the
-40°C to +85°C temperature range.
Typical Application
3167.2007.03.1.4
2.7V to 5.5V
2
Cwire™ (Advanced Simple
EN/SET
C1
1µF
C
1µF
IN
GND
C1+
C1-
IN
EN/SET
AAT3167
OUTCP
C2+
C2-
D1
D2
D3
D4
D5
C2
1µF
High Efficiency 1X/1.5X/2X Charge
Pump for White LED Applications
Features
Applications
D1
V
Fully Programmable Current with Single Wire
— 16-Step Logarithmic Scale
— 14/18/27mA Max Current
— Four Low-Current Settings Down to 115µA
— Low I
Tri-Mode 1X, 1.5X, 2X Charge Pump for
Maximum Efficiency and V
Drives Up to Five LEDs
Individual Main-Sub (4-1) Group Control
No Inductors, Low Noise Operation
1MHz Constant Switching Frequency
Small Application Circuit
Built-In Thermal Protection
Built-In Auto-Disable for Open Circuit
Automatic Soft Start
I
STDFN33-14 or QFN44-16 Package
Color (RGB) Lighting
Programmable Current Sink
Transmissive LCD Display
White LED Backlighting
White Photo Flash for Digital Still Cameras
Q
D2
IN
<1µA in Shutdown
Range: 2.7V to 5.5V
Current Mode
D3
Q
D4
(50µA) for Single-Channel, Low-
D5
ChargePump
C
1µF
OUT
F
Coverage
1

Related parts for AAT3167IFO-T1

Related keywords