MPS-301A World Products, Inc., MPS-301A Datasheet - Page 4

no-image

MPS-301A

Manufacturer Part Number
MPS-301A
Description
Integrated, Absolute Pressure Sensor
Manufacturer
World Products, Inc.
Datasheet
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
ELECTRICAL & PIN LAYOUT
SPECIFICATION NOTES
1. Operating and storage temperature to strictly not exceed stated values.
2. Pressure unit conversion --- 1 atm=101.325 kPa=1013.25 hPa=14.504 psi.
3. Operating pressure and temperature. The nominal pressure under which the device can be exposed under
4. Proof pressure and temperature. The extremes of temperature and pressure that the device can withstand
5. Supply Voltage is the nominal operating voltage. The device output is ratio metric (scales with the supply)
6. Stated Warm up time is a recommended time after power up before measurement stability is reached within
7. All outputs are measured with a nominal 4.7k load on the output pin, and with the power supply decoupled by
8. Accuracy represents the expected deviation of the sensor value from the ideal linear behavior over
9. Offset stability represents the proportion of the deviation in offset (zero pressure output) at fixed temperature
10. Device operating lifetime is verified using accelerated aging techniques.
Integrated, Absolute Pressure Sensor
normal operating conditions. Unless explicitly stated, other specifications are rated over the operating
pressure and temperature ranges.
without performance degradation.
within the stated range.
the rated accuracy range.
16uF electrolytic / 0.1uF ceramic capacitor pair, with an applied power supply within 5mV of the nominal value
at temperature of T=25±5°C
temperature and pressure, and includes thermal and pressure linearity and hysteresis effects over the life of
the sensor. This is validated using accelerated aging techniques such as high temperature biased life, thermal
cycling and thermal and pressure cycling tests.
T=25±5°C, over the life of the sensor, and includes the effects of thermal and pressure hysteresis as well as
other sources of drift.
MPS-301A
1907 Westlands Centre, 20 Westlands Road, Quarry Bay, Hong Kong
Tel : (+852) 2565 6979
Email : sales@jlworld.com
Website : www.jlworld.com
PIN 12
PIN 11
PIN 10
PIN 9
PIN 8
PIN 7
Pad
10
11
12
1
2
3
4
5
6
7
8
9
Symbol
Fax : (+852) 2565 0319
OUT
SDA
SCL
Vdd
Vss
Vss
IO1
IO2
NC
NC
NC
NC
Description
No Connect
SPI data out (Interface Option S)
SPI chip select
(Interface Option S)
I ²CLK & SPI Clock
(Interface Options I & S)
Data I/O for I² C & data in for SPI
(Interface Options I & S)
No Connect
Power Supply Positive
Connection
Power Supply Negative
Connection
No Connect
Analogue output
No Connect
Power Supply Negative
Connection
Document #E:DS-SHPS-MPS301A Rev A
060347-A2
Page 4 of 9

Related parts for MPS-301A