V201V2-T01 CHIMEI, V201V2-T01 Datasheet - Page 18

no-image

V201V2-T01

Manufacturer Part Number
V201V2-T01
Description
LCD_Module
Manufacturer
CHIMEI
Datasheet
8. PRECAUTIONS
notice. Please contact CMO ’s representative while your product design is based on this specification.
The information described in this technical specification is tentative and it is possible to be changed without prior
8.1 ASSEMBLY AND HANDLING PRECAUTIONS
8.2 SAFETY PRECAUTIONS
(10) When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) It is recommended to assemble or to install a module into the user’s system in clean working areas.
(3) Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight.
(4) Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the
(5) Do not plug in or pull out the I/F connector while the module is in operation.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and
(8) Moisture can easily penetrate into LCD module and may cause the damage during operation.
(9) High temperature or humidity may deteriorate the performance of LCD module. Please store LCD
(1) The startup voltage of a Backlight is approximately 1000 Volts. It may cause an electrical shock while
(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
(3) After the module’s end of life, it is not harmful in case of normal operation and storage.
The dust and oil may cause electrical short or worsen the polarizer.
damage and latch-up of the CMOS LSI chips.
easily scratched.
modules in the specified storage conditions.
response time will become slow, and the starting voltage of CCFL will be higher than that of room
temperature.
assembling with the inverter. Do not disassemble the module or insert anything into the Backlight unit.
case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
18
Issued Date: Jun. 12, 2003
Model No.: V201V2-T01
Tentative
Version0.0

Related parts for V201V2-T01