AN1921 Motorola / Freescale Semiconductor, AN1921 Datasheet - Page 29

no-image

AN1921

Manufacturer Part Number
AN1921
Description
AN1921 General DSP568xx Interface Examples using the Embedded SDK
Manufacturer
Motorola / Freescale Semiconductor
Datasheet
Appendix E.
The following is taken from the MPX4115A Integrated Pressure Sensor Data sheet.
The Motorola MPX4115A series Manifold Absolute Pressure (MAP) sensor for engine control is
designed to sense absolute air pressure. Its operating pressure range is 15 to 115 kPa (2.2 to 16.7 psi)
which produces a voltage output of 0.2 to 4.8V.
Motorola’s MAP sensor, integrated on-chip, bipolar op-amp circuitry and thin film resistor network to
provide a high-output signal and temperature compensation. The small form factor and high reliability
of on-chip integration make the Motorola MAP sensor a logical and economical choice for the
automotive system designers.
Among its features:
Application examples:
Figure E-1
output curves are shown for operation over 0 to 85
of the rated pressure range.
also shows the pins to aid in proper use and installation.
Pressure Sensor
1.5% maximum error over 0
Ideally suited for microprocessor and microcontroller-based systems
Temperature compensated from –40
Aviation altimeters
Industrial controls
Engine control
Weather stations and weather reporting devices
shows the sensor output signal relative to pressure input. Typical minimum and maximum
Interface Examples Using the Embedded SDK
Figure E-2
Motorola’s MPX4115A Integrated
o
to 85
depicts the version of the sensor employed with this demo and
o
C
o
to +125
o
C temperature range. Output will saturate outside
o
C
Integrating Devices With the EVM Board
29

Related parts for AN1921