AN2757 Freescale Semiconductor / Motorola, AN2757 Datasheet - Page 9

• Manufacturer Part Number: AN2757
• Description: MPC5200 Quick Start
• Manufacturer: Freescale Semiconductor / Motorola

Application Framework
Figure 8. CodeWarrior Flash Programmer: “Program / Verify”
Figure 9. Examining the Image SIze in the S-Record File
Back on the “Program / Verify” page in the Flash Programmer, specify a path to the s-record file to be programmed
(“runram_bl.mot” for the “Standalone BL” target) and press the “Program” button. If BDM interface is properly connected and the
Lite5200 device is powered on, the Flash Programmer “Status” line should display the progress of the operation. The “Show
Log” button can be used to display a detailed report of a Flash programming operation.
Now when the “B H/L” jumper switch is set to the “boot-low” option on the Lite5200 board, the “Standalone BL” application is
ready for booting from the Flash memory.
5
Application Framework
This section describes the content and the key parts of each MPC5200_Quick_Start-based project.
In the CodeWarrior project tree window, a project can be seen logically divided into a tree-like structure of virtual “folders” and
project files
(Figure
10). The following subsections will describe each project item in detail.
AN2757 MPC5200 Quick Start and Graphical Configuration Tool
Freescale Semiconductor
9