MW6208 AMECO, MW6208 Datasheet - Page 11

• Manufacturer Part Number: MW6208
• Description: USB 2.0 FLASH DISK CONTROLLER
• Manufacturer: AMECO

www.DataSheet4U.com
4 ELECTRICAL CHARACTERISTICS
4.1 PARAMETER CONDITIONS
Unless otherwise specified, all voltages are
referred to VSS (Digital Ground).
4.1.1 Minimum and Maximum values
Unless otherwise specified the minimum and
maximum values are guaranteed in the worst
conditions of ambient temperature, supply
voltage and frequencies by tests in
production on 100% of the Devices with an
ambient temperature at T
and T
temperature range).
Data based on characterization results,
design simulation and/or technology
characteristics are indicated in the table
footnotes and are not tested in production.
Based on characterization, the minimum and
maximum values refer to sample tests and
represent the mean value plus or minus three
times the standard deviation (mean±3Σ).
4.1.2 Typical values
Unless otherwise specified, typical data are
based on T
VDD33A=3.3V with internal LDO bypass.
They are given only as design guidelines and
are not tested.
4.1.3 Typical curves
Unless otherwise specified, all typical curves
are given only as design guidelines and are
not tested.
4.1.4 Loading capacitor
The loading conditions used for pin
parameter measurement are shown in
Figure 4.
A
=T
A
max (given by the selected
A
=25°C, VCCA5 = 5.0V or
A
=25°C
Figure 4. Pin loading conditions
4.1.5 Pin input voltage
The input voltage measurement on a pin
of the device is described in Figure 5.
Figure 5. Pin input voltage