sfp-gi2lktd5dca JDS Uniphase Corporation, sfp-gi2lktd5dca Datasheet - Page 18

• Manufacturer Part Number: sfp-gi2lktd5dca
• Description: Sfp Optical Transceiver--oc-48 And Oc-12 For Up To 80-km Reach And Gigabit Ethernet For Up To 120-km Reach
• Manufacturer: JDS Uniphase Corporation

18
Other information related to the DWDM SFP optical transceiver includes:
• Section 4.1
• Section 4.2
• Section 4.3
4.1 Package and Handling Instructions
Connector covers
The JDSU SFP optical transceiver is supplied with an LC duplex receptacle. The
connector plug supplied protects the connector during standard manufacturing
processes and handling by preventing contamination from dust, aqueous solutions,
body oils, or airborne particles.
Note: It is recommended that the connector plug remain on whenever the
transceiver optical fiber connector is not inserted.
Recommended cleaning and degreasing chemicals
JDSU recommends the use of methyl, isopropyl and isobutyl alcohols for cleaning.
Do not use halogenated hydrocarbons (trichloroethane, ketones such as acetone,
chloroform, ethyl acetate, MEK, methylene chloride, methylene dichloride, phenol,
N-methylpyrolldone).
This product is not designed for aqueous wash.
Housing
The JDSU SFP optical transceiver housing is made from die-cast zinc and stainless
steel sheet metal.
4.2 ESD Discharge (ESD)
Handling
Normal ESD precautions are required during the handling of this module. This
transceiver is shipped in ESD protective packaging. It should be removed from
the packaging and otherwise handled in an ESD protected environment utilizing
standard grounded benches, floor mats, and wrist straps.
Test and operation
In most applications, the optical connector will protrude through the system
chassis and be subjected to the same ESD environment as the system. Once
properly installed in the system, this transceiver should meet and exceed common
ESD testing practices and fulfill system ESD requirements.
Typical of optical transceivers, this module’s receiver contains a highly sensitive
optical detector and amplifier which may become temporarily saturated during
an ESD strike. This could result in a short burst of bit errors. Such an event
might require that the application reacquire synchronization at the higher layers
(serializer/deserializer chip).
Section 4
SFP OPTICAL TRANSCEIVER—OC-48 AND OC-12 FOR UP TO
80-KM REACH AND GIGABIT ETHERNET FOR UP TO 120-KM REACH
Packing and Handling Instructions
ESD Discharge (ESD)
Eye Safety
Related Information