stv-h11-f-co Power-One, stv-h11-f-co Datasheet - Page 5

• Manufacturer Part Number: stv-h11-f-co
• Description: Accessories Cassette Style Mating Connectors H11, H15, H15s2, H15s4
• Manufacturer: Power-One

H15S4, H15S2 Connectors
These special connectors derive from the H15 connectors
having standard contacts as the standard connectors,
combined with 4 (H15S4) or 2 (H15S2, discontinued) high-
current contacts (jacks) according to DIN 41626. These jacks
are specially designed to handle currents up to 40 A. They
correspond to quality class 2, allowing for 400 mating cycles.
The contact material is high-quality Phosphor Bronze.
The high-current jacks are joined separately to the connectors.
To install them, carefully follow the assembly instructions. It is
extremely important to solder cables, screw cable terminals or
heat shrink sleeves to high-current jacks first, before inserting
them into the moulding. Paralleled converters should
preferably be interconnected on current bars or at a star point.
Using screw versions, the two outer high-current jacks may be
inserted at a 90° angle in order to prevent possible short
circuits between the cable terminals, especially in applications
Mechanical Dimensions (in mm)
BCD20022 Rev. AB, 9-Apr-09
Table 3: H15S2 and H15S4 connector survey
Female connector
type
STV-H15S2-FSF/CO
STV-H15S2-F/CO
STV-H15S4-FSF/CO
STV-H15S4-F/CO
STV-H15S4-FLS/CO
STV-H15S4-FSR/CO
1
2
3
Delivery content: H15S4 (S2) moulding, 4 (2) high current jacks
and assembly instructions. Screw versions also include four M4
screws with washers and heat shrink sleeves.
Spare jacks are available on request: screw version YVM002,
solder version XMB045; see fig. 11.
Obosolete. Use female connectors with faston terminals instead!
H15S2 conectors are not for new designs and will be
discontinued.
32
30
28
3
26
3
2
2
24
®
Reference
HZZ 00116
HZZ 00115
HZZ 00110
HZZ 00105
HZZ 00109
HZZ 00108
22
20
84.9
95
90
18
16
14
Description of terminals
11 faston terminals 6.3
11 faston terminals 6.3
7 faston terminals 6.3
7 faston terminals 6.3
7 screw terminals 90°, 2.5 mm
7 screw terminals, 90°, 2.5 mm
12
Cassette Style Mating Connectors H11, H15, H15S2, H15S4
8/10
4/6
×
×
×
×
Page 5 of 9
0.8 mm, 4 screw jacks
0.8 mm, 4 solder jacks
0.8 mm, 2 screw jacks
0.8 mm, 2 solder jacks
12054a
2
with high vibration environment. Heat shrink sleeves might be
necessary for further isolation purposes or to keep clearances
and creepage distances at specified levels.
An extraction tool allows removal of the high-current jacks for
replacement (see fig. 15).
2
, torque ≤ 26.6 Ncm, 4 solder jacks
, torque ≤ 26.6 Ncm, 4 screw jacks
Caution: The use of an adequate cable strain relief device (e.g.
Cable Hood etc.) is essential, in order to protect the high-current
contact jacks from damage. Do not screw, solder or manipulate
these contacts, when the connector is plugged into the male
connector! The use of highly flexible cables is strongly
recommended.
Note: H15S4 connectors (male version) are used in the following
converter series (case size): K, PSK with line currents ≥20 A.
Note: H15S2 connectors (male version) are used in the following
converter series (case size): P1000, K4000 with line currents
≥20 A. H15S2 connectors are not for new designs and will be
discontinued. Please consult the product data sheets for replacing
models.
Fig. 11a
Solder jack XMB045
13
European
Projection
1
1
1
1
Fig. 12
STV-H15 S2-FSF/CO
11 faston terminals and two screw
jacks.
STV-H15 S2-F/CO
11 faston terminals and two solder
jacks (solder jacks are shown in fig.
15).
1
1
Fig. 11b
Screw jack YVM002
for screws M4.
Accessories
www.power-one.com
Fig.
(13)
(14)
(11)
13
14
11
Integrated
coding
yes
yes
yes
yes
yes
yes