cmc-sr2159er36 Pepperl+Fuchs, cmc-sr2159er36 Datasheet - Page 8

• Manufacturer Part Number: cmc-sr2159er36
• Description: Easy Tool Retracting System Cmc-sr2159er36
• Manufacturer: Pepperl+Fuchs

The following steps may require a certified pipe fitter for complete
installation.
Safety Notices
6. Open the process valve and check for packing leaks. If packing is leaking,
7. Insert to desired length. To lock the ROD in place, secure the LOCKING
8. Mount the safety plates or safety cap in place if applicable.
9. A SAFETY NUT or SHIELD must be installed on ER probe(s) after
10. If the system is greater than 150 psi, Metal Samples Corrosion Monitoring
11. If the system pressure is greater than150 psi, Metal Samples Corrosion
12. All retractable PACKING GLAND components, especially safety devices,
shut the process valve, remove the PACKING GLAND, and readjust the
PACKING GLAND using steps 3-5.
The packing may be tightened as long as the rod will slide in and out
of the gland.
NUT and FERRULE.
Apply Anti-Seize Compound to prevent seizure of packing gland
parts.
“Chevrons” of Teflon® packing should be in the direction of open to
process.
inserting the PROBE into the PACKING GLAND and prior to mounting the
PACKING GLAND in the process.
Systems requires the use of an “Easy Tool Retracting System” to install
and remove any retractable PACKING GLAND systems.
Monitoring Systems requires the use of a “Safety Clamp” once the
retractable PACKING GLAND system has been installed.
must be evaluated periodically for proper installation. Special care must be
taken when evaluating components which are subject to high corrosion
environments for structural integrity.
Failure to follow the above safety measures can result in physical
injury to personnel and/or damage to plant equipment. If there are
any questions concerning these safety notices, please contact our
offices prior to attempting to use these products.
PTE (Teflon
Grafoil Packing
(Teflon
®
is a registered trademark of DuPont.)
®
) Packing
Packing Rings per Gland
3/8" 1/2" 5/8"
5
6
6
7
9
7