si5310 Silicon Laboratories, si5310 Datasheet - Page 23

no-image

si5310

Manufacturer Part Number
si5310
Description
Precision Clock Multiplier/regenerator Ic
Manufacturer
Silicon Laboratories
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
SI5310
Manufacturer:
GSI
Quantity:
238
Part Number:
si5310-C-GM
Manufacturer:
ADI
Quantity:
32
Part Number:
si53102-A3-GMR
0
9.
Notes:
1. All dimensions listed are in millimeters (mm).
2. The perimeter pads are to be Non-Solder Mask Defined (NSMD). Solder mask openings should be designed to leave 60-75 mm
3. The center thermal pad is to be Solder Mask Defined (SMD).
4. Thermal/Ground vias placed in the center pad should be no less than 0.2 mm (8 mil) diameter and tented from the top to prevent
5. The stencil aperture should match the pad size (1:1 ratio) for the perimeter pads. A 3x3 array of 0.5 mm square stencil openings, on a
6. A stencil thickness of 5 mil is recommended. The stencil should be laser cut and electropolished, with trapezoidal walls to facilitate
7. A “No-Clean”, Type 3 solder paste should be used for assembly. Nitrogen purge during reflow is recommended.
8. Do not place any signal or power plane vias in these “keep out” regions.
9. Suggest four 0.38 mm (15 mil) vias to the ground plane.
4
Symbol
x4 mm 20L QFN Recommended PCB Layout
separation between solder mask and pad metal, all the way around the pad.
solder from flowing into the via hole.
0.65 mm pitch, should be used for the center thermal pad.
paste release.
G
A
D
R
X
Y
e
Z
Pad Row/Column Width/Length
Thermal Pad Width/Height
Pad Pitch
Pad Radius
Pad Width
Pad Length
Pad Row/Column Separation
Pad Row/Column Extents
See Note 8
Gnd Pin
Parameter
See Note 9
Rev. 1.3
4.26
2.23
2.03
2.43
0.23
Min
Dimensions
0.50 BSC
0.12 REF
0.94 REF
Nom
2.25
2.08
2.46
0.25
4.28
Si5310
Max
2.28
2.13
2.48
0.28
4.31
23

Related parts for si5310