sm55161a-80hkcm Austin Semiconductor, Inc., sm55161a-80hkcm Datasheet - Page 53

• Manufacturer Part Number: sm55161a-80hkcm
• Description: 262144 X 16 Bit Vram Multiport Video Ram
• Manufacturer: Austin Semiconductor, Inc.

FIGURE 43: FULL-REGISTER TRANSFER-READ TIMING, EARLY-LOAD OPERATIONS
NOTES:
A. DQ outputs remain in the high-impedance state for the entire memory-to-data-register transfer cycle. The memory-to-data-register
transfer cycle is used to load the data registers in parallel from the memory array. The 512 locations in each data register are written
to from the 512 corresponding columns of the selected row.
B. Once data is transferred into the data registers, the SAM is in the serial-read mode, that is, the SQ is enabled, allowing data to be
shifted out of the registers. Also, the first bit to read from the data register after TRG\ has gone high must be activated by a positive
transition of SC.
C. A0 – A8.
D. Early-load operation is defined as t
E. There must be no rising transitions.
SMJ55161A
Rev. 1.6 03/05
Austin Semiconductor, Inc.
h(TRG)
MIN < t
h(TRG)
< t
d(RLTH)
MIN.
53
Austin Semiconductor, Inc. reserves the right to change products or specifications without notice.
Production
SM55161A
VRAM