df40c-10ds-0.4v Hirose Electric, df40c-10ds-0.4v Datasheet - Page 9

• Manufacturer Part Number: df40c-10ds-0.4v
• Description: 0.4 Mm Contact Pitch 1.5 Mm Above The Board Board-to-board /board-to-fpc Connectors
• Manufacturer: Hirose Electric

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BHandling Precautions when un-mating the connectors
Pitch Orientation
Width Orientation
DF40 Series●0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors
DF40*-*DS-0.4V
DF40*-*DP-0.4V
Corner Orientation
Fully mated
Lift even one side, keeping both boards parallel to each other.
When handling, circumstances prevent the connector from
being kept level during the un-mating. One end may be lifted
separate as shown.
However, to utilize this procedure the connector must be
mounted on a sufficiently rigid circuit board.
Any deflection of the board during this operation may result in
damage to the connectors or solder joints.
Do not attempt the start of the un-mating of the connectors
from one side or corner.
When un-mating is from the width orientation, as illustrated in
the diagram to the left, connector could be damaged. Do not
remove from the width orientation.
A261