SST-90 ETC-unknow, SST-90 Datasheet - Page 7

• Manufacturer Part Number: SST-90
• Description: Led Uni-color White 4-pin Ostar
• Manufacturer: ETC-unknow

All PhlatLight products are packaged and labeled with their respective bin as outlined in the tables on pages 3 and 4. When shipped,
each package will only contain one bin. The part number designation is as follows:
Note 1. WNNX nomenclature corresponds to the following:
Note 2. Some flux and chromaticity bins may have limited availability. Application specific bin kits, consisting of multiple bins,
Example: The part label SST-90-W65S-F11-WN-G4 refers to a 6500K standard CRI white, SST-90 emitter, F11 package configuration,
with a flux range of 1,000 to 1,200 lumens and a chromaticity value within the box defined by the four points (0.313, 0.338), (0.321,
0.348), (0.322, 0.336), (0.312, 0.328).
Example: The part label SST-90-W30M-F11-WL-U3 refers to a 3000K moderate CRI white, SST-90 emitter, F11 package configuration,
with a flux range of 700 to 850 lumens and a chromaticity value within the box defined by the four points (0.422, 0.399), (0.434, 0.403),
(0.426, 0.386), (0.415, 0.381).
SST:Surface mount
Product Family
SST
may be available. For ordering information, please refer to page 14 and reference the PhlatLight Binning and Labeling
document.
W = White
NN = color temperature, where:
X = color rendering index, where:
65 corresponds to 6500K
40 corresponds to 4000K
30 corresponds to 3000K, etc.
S (standard) corresponds to a typical CRI of 70
M (moderate) corresponds to a typical CRI of 83
H (high) corresponds to a typical CRI of 92.
SST-90 - Product Datasheet
90: 9.0 mm
Chip Area
90
PhlatLight Product Shipping and Labeling Information
2
WNNX: CCT and CRI
See Note 1 Below
WNNX
Color
Package Configuration
F11: 10 x 11mm
emitter
F11
© 2009 Luminus Devices, Inc. - All Rights Reserved
See page 3 for
Flux Bin
bins
FF
Chromaticity Bin
See pages 4-5 for
PRELIMINARY
bins
WW
Page 7