adns-6030 Avago Technologies, adns-6030 Datasheet - Page 3

• Manufacturer Part Number: adns-6030
• Description: Low Power Laser Mouse Bundles - Agilent Hewlett-packard
• Manufacturer: Avago Technologies

2D Assembly Drawing of ADNB-6031/32, PCBs and Base Plate
Figure 2. Exploded view drawing
Shown with ADNS-6130-001
Laser Mouse Lens, ADNS-
6230-001 VCSEL Assembly
Clip and ADNV-6330 VCSEL.
The components interlock as
they are mounted onto defined
features on the base plate.
The ADNS-6030 laser mouse
sensor is designed for
mounting on a through hole
PCB, looking down. There is
an aperture stop and features
on the package that align to
the lens.
The ADNV-6330 VCSEL is
recommended for illumination
provides a laser diode with a
single longitudinal and a single
transverse mode. It is
particularly suited as lower
power consumption and highly
coherent replacement of LEDs.
It also provides wider
operation range while still
remaining within single-mode,
reliable operating conditions.
3
The ADNS-6120 or ADNS-
6130-001 Laser Mouse Lens is
designed for use with ADNS-
6030 sensor and the
illumination subsystem
provided by the assembly clip
and the VCSEL. Together with
the VCSEL, the lens provides
the directed illumination and
optical imaging necessary for
proper operation of the Laser
Mouse Sensor. ADNS-6120 and
ADNS-6130-001 are precision
molded optical components
and should be handled with
care to avoid scratching of the
optical surfaces. ADNS-6120
also has a large round flange
to provide a long creepage
path for any ESD events that
occur at the opening of the
base plate.
*or ADNS-6120 for round lens
The ADNS-6230-001 VCSEL
Assembly Clip is designed to
provide mechanical coupling of
the ADNV-6330 VCSEL to the
ADNS-6120 or ADNS-6130-001
lens. This coupling is essential
to achieve the proper
illumination alignment required
for the sensor to operate on a
wide variety of surfaces.
Agilent Technologies provides
an IGES file drawing
describing the base plate
molding features for lens and
PCB alignment.