asmt-mw22-nnp00 Avago Technologies, asmt-mw22-nnp00 Datasheet - Page 12

• Manufacturer Part Number: asmt-mw22-nnp00
• Description: Moonstone 3 W High Brightness Power Led Light Source
• Manufacturer: Avago Technologies

Handling Precaution
The encapsulation material of the product is made of
silicone for better reliability of the product. As silicone is
a soft material, please do not press on the silicone or poke
a sharp object onto the silicone. These might damage the
product and cause premature failure. During assembly or
handling, the unit should be held on the body only. Please
refer to Avago Application Note AN 5288 for detail infor-
mation.
Moisture Sensitivity
This product is qualifi ed as Moisture Sensitive Level 4
per Jedec J-STD-020. Precautions when handling this
moisture sensitive product is important to ensure the reli-
ability of the product. Do refer to Avago Application Note
AN5305 Handling of Moisture Sensitive Surface Mount
Devices for details.
A. Storage before use
For product information and a complete list of distributors, please go to our web site:
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved.
AV02-3158EN - September 29, 2011
– Unopen moisture barrier bag (MBB) can be stored at
– It is not recommended to open the MBB prior to
< 40°C/90%RH for 12 months. If the actual shelf life
has exceeded 12 months and the humidity indicator
card (HIC) indicates that baking is not required, then
it is safe to refl ow the LEDs per the original MSL
rating.
assembly (e.g. for IQC).
DISCLAIMER: Avago’s products and software are not specifi cally designed, manufactured or authorized for sale
as parts, components or assemblies for the planning, construction, maintenance or direct operation of a nuclear
facility or for use in medical devices or applications. Customer is solely responsible, and waives all rights to make
claims against avago or its suppliers, for all loss, damage, expense or liability in connection with such use.
www.avagotech.com
B. Control after opening the MBB
C. Control for unfi nished reel
D. Control of assembly boards
E. Baking is required if
Recommended baking condition: 60±5°C for 20 hrs.
– The humidity indicator card (HIC) shall be read
– The LEDs must be kept at < 30°C/60%RH at all time
– For any unused LEDs, they need to be stored in
– If the PCB soldered with the LEDs is to be subjected
– HIC “10%” indicator is not blue and “5%” indicator is
– The LEDs are exposed to condition of > 30°C/60%RH
– The LEDs fl oor life exceeded 72 hrs.
immediately upon opening of MBB.
and all high temperature related process including
soldering, curing or rework need to be completed
within 72 hours.
sealed MBB with desiccant or desiccator at < 5%RH.
to other high temperature processes, the PCB
need to be stored in sealed MBB with desiccant
or desiccator at < 5%RH to ensure no LEDs have
exceeded their fl oor life of 72 hours.
pink.
at any time.