irm8602 ETC-unknow, irm8602 Datasheet - Page 5

• Manufacturer Part Number: irm8602
• Description: Infrared Remote Control System Receiver
• Manufacturer: ETC-unknow

■ TEST METHOD：
MODEL NO:
The specified electro-optical characteristics is satisfied under the following
Conditions at the controllable distance.
Measurement place
External light
Standard transmitter
Measuring system
A place that is nothing of extreme light reflected in the room.
Project the light of ordinary white fluorescent lamps which are not high
Frequency lamps and must be less then 10 Lux at the module surface.
(Ee≦10Lux)
A transmitter whose output is so adjusted as to
Wave form shown in Fig.-1.According to the measurement method shown in
Fig.-2 the standard transmitter is specified.
However , the infrared photodiode to be used for the transmitter should be
(Standard light / Light source temperature 2856 K).
According to the measuring system shown in Fig.-3
p=940nm,
=50nm. Also, photodiode is used of PD438B (V
IRM-8602
EVERLIGHT ELECTRONICS CO., LTD.
Device Number: DMO-860-002 REV:
ECN:
Vo=400mVp-p
Page:
and the output
R
=5V).
2.1
5/10