tlh10uah8720r7 Taiyo Yuden Co., Ltd, tlh10uah8720r7 Datasheet - Page 8

• Manufacturer Part Number: tlh10uah8720r7
• Description: Leaded Common Mode Choke Coils For Ac Lines
• Manufacturer: Taiyo Yuden Co., Ltd

【Test method and remarks】
【Test method and remarks】
【Test method and remarks】
【Test method and remarks】
【Test method and remarks】
【Test method and remarks】
【Test method and remarks】
■
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
co0304_reli_e-01
CM-RA/BU-RA Type
CM-RB Type
TLH, TLF Type
CM-RA/BU-RA Type
CM-RB Type
TLH, TLF Type
CM-RA/BU-RA Type
CM-RB Type
TLH, TLF Type
CM-RA/BU-RA Type
CM-RB Type
TLH, TLF Type
CM-RA/BU-RA Type
CM-RB Type
TLH, TLF Type
CM-RA/BU-RA Type
CM-RB Type
TLH, TLF Type
CM-RA/BU-RA Type
CM-RB Type
TLH, TLF Type
10. Withstanding : between wires and core
11. Rated voltage
12. Resistance to vibration
13. Solderability
14. Resistance to soldering heat
15. Thermnal shock
16. Damp heat
TLF
TLH, TLF (except TLF9UB) : 250VAC
TLF9UB
CM, TLH, TLF : According to JIS C 0040
CM
TLH, TLF : Solder temperature : 245±5℃
CM
TLH, TLF : Solder temperature : 260±5℃
CM, TLH, TLF :
TLH, TLF : Temperature : 60±2℃
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
RELIABILITY DATA
Direction
Frequency range : 10 to 55 to 10Hz (1 min.)
Amplitude
Mounting method : soldering onto PC board
Recovery
According to JIS C 0025
Conditions for 1 cycle
Number of cycles : 10
Recovery
Step
1
2
3
4
: Solder temperature : 235±5℃
: Solder temperature : 260±5℃
: Applied voltage : 2000VAC (TLF (except TLF9UB))
Duration
Immersion depth
Duration
Immersion depth
Duration
Immersion depth
Recovery
Duration
Immersion depth
Recovery
Duration
Humidity
Duration
Recovery
Room Temperature
Room Temperature
Temperature 〔℃〕
: At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the measurement within 2 hrs.
: 2 to 24 hrs of recovery under the standard condition after the test. (CM-RB)
: 2hrs each in X, Y and Z direction
: 1.5mm (shall not exceed acceleration 196m/s
: At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the measurement within 2hrs. (TLH, TLF)
ー25±3
＋85±2
: 90～95％RH
: 500 hrs
: At least 1hr of recovery under the standard removal from test chamber followed by the measurement within 2 hrs.
40±2℃ (※TLF14CB)
: 50VDC
: 500VDC (TLF9UB)
: 60sec.
: 5±0.5sec.
: Up to 2～2.5mm from terminal root.
: 1 to 2 hrs of recovery under the standard condition after the test.
: 10±1sec.
: Up to 1.0 to 1.5mm from PBC mounted level.
: At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the measurement within 2hrs.
: 2±0.5sec.
: According to detailed specification.
: 4±1sec.
: Up to 1.0 to 1.5mm from PBC mounted level.
No abnormality （ except TLH, TLF10UAH Type）
Within the specified range
Appearance : No abnormality
TLF9U : Inductance change : Within ±5％
At least 75% of terminal electrode is covered by new solder.
Solder shall be uniformly adhered onto immersed surfaces.
Appearance : No abnormality
TLF9UA : Inductance change : Within ±5%
Appearance : No abnormality
TLF9UA
TLH, TLF (except TLF9UA) : Withstanding voltage : No abnormality
TLF9UA
TLH, TLF (except TLF9UA) : Withstanding voltage : No abnormality
Durration 〔min〕
Within 3
Within 3
30±3
30±3
Total : 6hrs
2
: Inductance change
)
: Inductance change
Inductance change : Refer to individual specification
Inductance change : Within ±15%
TLH, TLF (except TLF9U) : Within the specified range
: Within ±15%
: Within ±15%
Inductance change : Refer to individual specification
TLF14CB : Within the specified range
1 2
Insulation resistance : No abnormality
Insulation resistance : No abnormality
co0304_reli-RP2