sx8634 Semtech Corporation, sx8634 Datasheet - Page 22

• Manufacturer Part Number: sx8634
• Description: Low Power, Capacitive Button And Slider Touch Controller 12 Sensors With Enhanced Led Drivers And Proximity Sensing
• Manufacturer: Semtech Corporation

SX8634
Low Power, Capacitive Button and Slider Touch Controller
(12 sensors) with Enhanced LED Drivers and Proximity Sensing
ADVANCED COMMUNICATIONS & SENSING
DATASHEET
3.14 Reset
The reset can be performed by 3 sources:
- power up,
- RESETB pin,
- software reset.
3.14.1 Power up
During power up the INTB is kept low. Once the power up sequence is terminated the INTB is released
autonomously. The SX8634 is then ready for operation.
Power Up vs. INTB
Figure 21
During the power on period the SX8634 stabilizes the internal regulators, RC clocks and the firmware initializes all
registers.
During the power up the SX8634 is not accessible and I2C communications are forbidden.
As soon as the INTB rises the SX8634 will be ready for I2C communication.
3.14.2 RESETB
When RESETB is driven low the SX8634 will reset and start the power up sequence as soon as RESETB is
driven high or pulled high.
In case the user does not require a hardware reset control pin then the RESETB pin can be connected to VDD.
Hardware Reset
Figure 22
Revision 7_6, October 10
© 2010 Semtech Corp.
www.semtech.com
22