pcx1331 World Products, Inc., pcx1331 Datasheet - Page 5

• Manufacturer Part Number: pcx1331
• Description: Interference Suppression Film Capacitors
• Manufacturer: World Products, Inc.

Pilkor components
CONSTRUCTION
MOUNTING
The capacitors are designed for mounting on printed-circuit boards.
The capacitors packed in bandoliers are designed for mounting on printed-circuit boards
by means of automatic insertion machines.
For detailed specifications refer to chapter "PACKAGING".
In order to withstand vibration and shock tests, it must be ensured that the stand-off
pips are in good contact with the printed-circuit board.
- For pitches of 15mm the capacitors shall be mechanically fixed by leads.
- For larger pitches the capacitors shall be mounted in the same way and the body clamped.
SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD
The maximum length and width of film capacitors are shown in the following drawing ;
- Eccentricity as in drawing.
- Product height with seating plane as given by IEC 60717 as reference : h
Interference Suppression
film capacitors
NORMAL USE
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK
The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.
Eccentricity
I max= I +0.3 mm
MKP metallized polypropylene film
metal spray layer
connecting wire
(tin-coated)
137
b max = b + 0.3mm
max
≤ h+0.3mm
PCX1 331