v23836-c18-c63 Infineon Technologies Corporation, v23836-c18-c63 Datasheet - Page 3

• Manufacturer Part Number: v23836-c18-c63
• Description: Transceiver With Duplex Receptacle Single Mode 1300 Sonet Oc-3 Stm-1
• Manufacturer: Infineon Technologies Corporation

Description
The Infineon single mode ATM transceiver complies with the ATM Forum’s Network
Compatible ATM for Local Network Applications document and ANSI’s Broadband
ISDN - Customer Installation Interfaces, Physical Media Dependent Specification,
T1.646-1995, Bellcore - SONET OC-3 IR-1 and ITU-T G.957 STM-1 S-1.1.
Supported Link Lengths
Category within Standard
SDH STM S-1.1
SONET OC-3 IR-1
1)
ATM was developed to facilitate solutions in multimedia applications and real time
transmission. The data rate is scalable, and the ATM protocol is the basis of the
broadband public networks being standardized in the International Telecommunications
Union (ITU), the former International Telegraph and Telephone Consultative Committee
(CCITT). ATM can also be used in local private applications.
The Infineon single mode ATM transceiver is a single unit comprised of a transmitter, a
receiver, and an SC receptacle. This design frees the customer from many alignment
and PC board layout concerns. The module is designed for low cost WAN applications.
It can be used as the network end device interface in workstations, servers, and storage
devices, and in a broad range of network devices such as bridges, routers, and intelligent
hubs, as well as wide area ATM switches.
This transceiver operates at 155.520 Mbit/s from a single power supply (5 V or 3.3 V).
The differential data inputs and outputs are DC-coupled and PECL compatible.
Preliminary Product Information
Maximum reach over fiber type SM-G.652 as defined by ITU-T G.957 and Telcordia GR-253-CORE standards.
Longer reach possible depending upon link implementation.
3
min.
0
0
Reach
max.
15,000
21,000
V23836-C18-C363
V23836-C18-C63
1)
Description
2004-02-13
Unit
meters