isd201x Osram Opto Semiconductors, isd201x Datasheet - Page 16

• Manufacturer Part Number: isd201x
• Description: Serial Input Alphanumeric Industrial Display
• Manufacturer: Osram Opto Semiconductors

Remarks:
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
Published by
OSRAM Opto Semiconductors GmbH
Wernerwerkstrasse 2, D-93049 Regensburg
www.osram-os.com
© All Rights Reserved.
2006-04-04
Operation above +100°C ambient is possible if the following conditions are met.
The junction should not exceed T
should not exceed TC=100°C.
Maximum allowable dissipation is derived from:
V
Dimensions are specified as follows: inch (mm)
V
All typical values specified at V
The displays are categorized for luminous intensity with the intensity category designated by a letter code on the
bottom of the package.
The luminous sterance of the LED may be calculated using the following relationships:
L
L
A=5.3 x 10
Dominant wavelength (l
which defines the color of the device.
All typical values specified at V
The luminous intensity is measured at T
measurement.
A critical component is a component used in a life-support device or system whose failure can reasonably be
expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that
device or system.
Life support devices or systems are intended
(a) to be implanted in the human body,
or
(b) to support and/or maintain and sustain human life.
If they fail, it is reasonable to assume that the health or the life of the user may be endangered.
V
V
CC
B
(cd/m
(Footlamberts) = p l
Pulse Width Frequency—50 kHz (max.)
=5.25 V, V
2
) = l
–8
V
m
B
(Candela)/A (Meter)
=2.4 V, V
2
= 5.8 x 10
v
(Candela)/A (Foot)
dom
COL
–7
) is derived from the CIE chromaticity diagram and represents the single wavelength
=3.5 V 20 LEDs on per character, 20% DF.
(Foot)
CC
CC
J
=5.0 V and T
=5.0 V and T
=125°C and the case temperature (as measured at pin 1 or the back of the display)
2
2
2
A
=T
A
A
=25°C unless otherwise noted.
=25°C unless otherwise noted.
J
=25°C. No time is allowed for the device to warm up prior to
16
ISD201X, ISD231X, ISD235X