25lc1024 Microchip Technology Inc., 25lc1024 Datasheet - Page 18

• Manufacturer Part Number: 25lc1024
• Description: 1 Mbit Spi Bus Serial Eeprom
• Manufacturer: Microchip Technology Inc.

25AA1024
2.11
Deep Power-Down mode of the 25AA1024 is its
lowest power consumption state. The device will not
respond to any of the Read or Write commands while
in Deep Power-Down mode, and therefore it can be
used as an additional software write protection feature.
The Deep Power-Down mode is entered by driving CS
low, followed by the instruction code (Figure 2-11) onto
the SI line, followed by driving CS high.
If the CS pin is not driven high after the eighth bit of the
instruction code has been given, the device will not
execute Deep power-down. Once the CS line is driven
high, there is a delay (T
to its lowest consumption.
FIGURE 2-11:
DS21836E-page 18
DEEP POWER-DOWN MODE
DEEP POWER-DOWN SEQUENCE
DP
SCK
) before the current settles
CS
SO
SI
1
0
0
1
Preliminary
High-Impedance
1
2
1
3
All instructions given during Deep Power-Down mode
are ignored except the Read Electronic Signature
Command (RDID). The RDID command will release
the device from Deep power-down and outputs the
electronic signature on the SO pin, and then returns
the device to Standby mode after delay (T
Deep Power-Down mode automatically releases at
device power-down. Once power is restored to the
device, it will power-up in the Standby mode.
1
4
0
5
0
6
1
7
© 2007 Microchip Technology Inc.
REL
)