sc60021rm Staco Energy Products Co., sc60021rm Datasheet - Page 31

• Manufacturer Part Number: sc60021rm
• Description: Parallel Redundancy/capacity On-line Ups
• Manufacturer: Staco Energy Products Co.

UPS Default Settings and their alternatives
3.5.1.19 Make sure the UPS is OFF. Press On Switch
3.5.1.20 To scroll down the LCD screen, you may refer to Chapter 3.5.1.15
3.5.1.21 With the exception of the alarm/buzzer(as drawing Q1 & Q2) and Self-
3.5.1.22 Drawings S1 and S2 show the acceptable range for bypass input. It
3.5.1.23 Drawing T shows the bypass frequency window of the Inverter Output.
3.5.1.24 Drawing U shows the acceptable Inverter Output Voltages as 200Vac,
3.5.1.25 Drawing V1, V2, V3 and V4 show the operating modes of the UPS, of
3.5.1.26 Drawing W shows the setting of the Inverter Output, which can be
3.5.1.27 Drawing X shows a specified address and position of the UPS when the
3.5.1.28 When all of the setting changes are complete, you have to press the
key pads simultaneously for approx. 3 seconds, the alarm will sound
twice, the LCD display screen shows as drawing Q1. The UPS is now in
settings mode.
test(as drawings R1 & R2), all of the other default settings may be
changed by pressing the scroll up
can be 184Vac~260Vac (S2) or 195Vac~260Vac (S1).
The acceptable setting values are ±3Hz and ±1Hz.
208Vac, 220Vac, 230Vac, or 240Vac.
the UPS. Alternatives are Online, Eco(Economic) mode, fixed 50Hz
Output or fixed 60Hz Output.
calibrated as 0%, +1%, -1%, +2%, -2%, +3%, or -3%.
UPS is in Parallel mode. The settable position numbers are from 1st to
4th. The number must be 1st if the UPS is not in parallel.
enter
drawing Z, then the LCD screen will show as drawing AA to complete
the setting changes. If you don’t want to change the settings, press the
“OFF”
directly, which means your setting changes are ignored.
Z
AA
* Press Enter key to save data.
key to save all the changes when the LCD screen shows as
key for 5 seconds, then the LCD screen turns to Drawing AA
30
key pad.
and scroll down