W83627F Information Storage Devices, Inc, W83627F Datasheet - Page 94

no-image

W83627F

Manufacturer Part Number
W83627F
Description
LPC Interface I/o Plus Kbc, Game Port, Midi Port
Manufacturer
Information Storage Devices, Inc
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
W83627F-AW
Manufacturer:
WINBOND/华邦
Quantity:
20 000
CRF7 (Default 0x00)
4.10 Logical Device 9 (GPIO Port 3 This power of the Port is standby source (VSB) )
CR30 (Default 0x00)
CRF0 (GP30-GP35 I/O selection register. Default 0xFF Bit 7-6: Reserve)
When set to a '1', respective GPIO port is programmed as an input port.
When set to a '0', respective GPIO port is programmed as an output port.
CRF1 (GP30-GP35 data register. Default 0x00 Bit 7-6: Reserve)
If a port is programmed to be an output port, then its respective bit can be read/written.
If a port is programmed to be an input port, then its respective bit can only be read.
CRF2 (GP30-GP35 inversion register. Default 0x00 Bit 7-6: Reserve)
When set to a '1', the incoming/outgoing port value is inverted.
When set to a '0', the incoming/outgoing port value is the same as in data register.
CRF3 (SUSLED mode register. Default 0x00)
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3 -0
Bit 7 - 1 : Reserved
Bit 0
Bit 7-6
This mode selection bit 7-6 keep its settings until battery power loss.
Bit 5 - 0 : Reserved.
: Mouse interrupt reset Enable or Disable
= 1
= 0
: Keyboard interrupt reset Enable or Disable
= 1
= 0
: Force Watch Dog Timer Time-out, Write only
= 1
: Watch Dog Timer Status, R/W
= 1
= 0
: These bits select IRQ resource for Watch Dog. Setting of 2 selects SMI.
= 1 Activate GPIO3.
= 0 GPIO3 is inactive.
: select Suspend LED mode
= 00
= 01
= 10
= 11
Watch Dog Timer is reset upon a Mouse interrupt
Watch Dog Timer is not affected by Mouse interrupt
Watch Dog Timer is reset upon a Keyboard interrupt
Watch Dog Timer is not affected by Keyboard interrupt
Force Watch Dog Timer time-out event; this bit is self-clearing.
Watch Dog Timer time-out occurred
Watch Dog Timer counting
Suspend LED pin is drived low.
Suspend LED pin is tri-stated.
Suspend LED pin is a 1Hz toggle pulse with 50 duty cycle.
Suspend LED pin is a 1/4Hz toggle pulse with 50 duty cycle.
- 90 -
Publication Release Date:November 2002
W83627HF/F
Revision 2.0

Related parts for W83627F