mb95f118awpv2 Fujitsu Microelectronics, Inc., mb95f118awpv2 Datasheet - Page 4

• Manufacturer Part Number: mb95f118awpv2
• Description: 8-bit Proprietary Microcontrollers
• Manufacturer: Fujitsu Microelectronics, Inc.

4
MB95110A Series
(Continued)
*1 : For details of option, refer to “ MASK OPTIONS”.
*2 : Specify clock mode when ordering MASK ROM.
Note : Part number of the evaluation device in MB95110A series is MB95FV100B-101. When using it, the MCU
Parameter
Standby mode
8/16-bit
compound timer
(2 channels)
16-bit PPG
8/16-bit PPG
(2 channels)
Watch counter
(for dual clock product)
Watch prescaler
(for dual clock product)
External interrupt
(8 channels)
board (MB2146-301) is required.
Part number
Each channel of the timer can be used as “8-bit timer × 2 channels” or “16-bit timer
× 1 channel”.
Built-in timer function, PWC function, PWM function, capture function and square
waveform output
Count clock : 7 internal clocks and external clock can be selected.
PWM mode or one-shot mode can be selected.
Counter operating clock : 8 selectable clock sources
Support for external trigger start
Each channel of the PPG can be used as “8-bit PPG × 2 channels” or “16-bit PPG
× 1 channel”.
Counter operating clock : Eight selectable clock sources
Count clock : Four selectable clock sources (125ms, 250ms, 500ms, or 1s)
Counter value can be set from 0 to 63. (Capable of counting for 1 minute when se-
lecting clock source 1 second and setting counter value to 60)
4 selectable interval times (125 ms, 250 ms, 500 ms, or 1 s)
Interrupt by edge detection (rising, falling, or both edges can be selected)
Can be used to recover from standby modes.
Sleep, stop, watch (for dual clock product) , and timebase timer
MB95116A
MB95F118AS
MB95F118AW