ns3l183t-h3 NICHIA CORPORATION, ns3l183t-h3 Datasheet - Page 8
![no-image](/images/no-image-200.jpg)
ns3l183t-h3
Manufacturer Part Number
ns3l183t-h3
Description
Specifications For Nichia Chip Type Warm White Led
Manufacturer
NICHIA CORPORATION
Datasheet
1.NS3L183T-H3.pdf
(17 pages)
(5) Handling Precautions
· Bare Hand
· Tweezers
· Pick and Place
· Drop
When handling the product, touching encapsulant with bare hands will contaminate its
surface that could affects on optical characteristics.
force to the encapsulant by hands might result in catastrophic failure of the LEDs due to
wire deformation and/or breakage.
Since silicone used as encapsulating resin in this product is a soft material, the upper surface of the
product is soft.
damage to encapsulant (such as scratch, chip-out and delamination) and wire (such as deformation and
breakage) and LED detachment.
Recommended conditions : Outer nozzle ≥ φ 4.3 mm
Please note that a package damage such as crack might occur when having dropped the product.
Avoid direct contact to the encapsulant with the picking up nozzle.
Failure to comply might result in damage to encapsulant and in the worst cases,
catastrophic failure of the LEDs due to wire deformation and/or breakage.
Pressuring onto the product might cause catastrophic failure of the LEDs due to
-7-
In the worst cases, excessive
Nichia STS-DA1-0665
<Cat.No.090309>