tsl2563 TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS, tsl2563 Datasheet - Page 36

• Manufacturer Part Number: tsl2563
• Description: Low-voltage Light-to-digital Converter
• Manufacturer: TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS

TSL2562, TSL2563
LOW-VOLTAGE
LIGHT-TO-DIGITAL CONVERTER
TAOS066J − MAY 2007
Moisture Sensitivity
36
Copyright E 2007, TAOS Inc.
Optical characteristics of the device can be adversely affected during the soldering process by the release and
vaporization of moisture that has been previously absorbed into the package molding compound. To ensure the
package molding compound contains the smallest amount of absorbed moisture possible, each device is
dry-baked prior to being packed for shipping. Devices are packed in a sealed aluminized envelope with silica
gel to protect them from ambient moisture during shipping, handling, and storage before use.
The CS package has been assigned a moisture sensitivity level of MSL 2 and the devices should be stored under
the following conditions:
Rebaking will be required if the aluminized envelope has been open for more than 1 year. If rebaking is required,
it should be done at 90°C for 3 hours.
The T package has been assigned a moisture sensitivity level of MSL 3 and the devices should be stored under
the following conditions:
Rebaking will be required if the devices have been stored unopened for more than 6 months or if the aluminized
envelope has been open for more than 168 hours. If rebaking is required, it should be done at 90°C for 4 hours.
Temperature Range
Relative Humidity
Floor Life
Temperature Range
Relative Humidity
Total Time
Opened Time
60% maximum
60% maximum
6 months from the date code on the aluminized envelope — if unopened
5°C to 50°C
1 year out of bag at ambient < 30°C / 60% RH
5°C to 50°C
168 hours or fewer
MANUFACTURING INFORMATION
r
www.taosinc.com
r
The LUMENOLOGY r Company