s-25a080a Seiko Instruments Inc., s-25a080a Datasheet - Page 18

• Manufacturer Part Number: s-25a080a
• Description: 25?c Operation Spi Serial E2prom For Automotive Electric Component
• Manufacturer: Seiko Instruments Inc.

18
125°C OPERATION SPI SERIAL E
S-25A080A/160A/320A
5. Write in the status register (WRSR)
SCK
WP
SO
CS
The values of status register (SRWD, BP1, BP0) can be rewritten by inputting the WRSR instruction. But b6, b5, b4,
b1, b0 of status register cannot be rewritten. b6 to b4 are always “0” when reading the status register.
Before inputting the WRSR instruction, set bit WEL by the WREN instruction. The operation of WRSR is shown below.
Set the chip select ( CS ) “L” first. After that, input the instruction code and data from serial data input (SI). To start
WRSR Write (t
clock. It is possible to confirm the operation status by reading the value of bit WIP during WRSR Write. Bit WIP is “1”
during Write, “0” during any other status. Bit WEL is reset when Write is completed.
With the WRSR instruction, the values of BP1 and BP0; which determine the area size the users can handle as the
Read Only memory; can be changed. Besides bit SRWD can be set or reset by the WRSR instruction depending on
the status of Write protect WP . With a combination of bit SRWD and Write protect WP , the device can be set in
Hardware Protect mode (HPM). In this case, the WRSR instruction is not be performed (Refer to “
Operation”).
Bit SRWD and BP1, BP0 keep the value which is the one prior to the WRSR instruction during the WRSR instruction.
The newly updated value is changed when the WRSR instruction has completed.
To cancel the WRSR instruction, input the clock different from a specified value (n = 16 clock) while CS is in “L”.
SI
PR
), set the chip select ( CS ) to “H” after inputting data or before inputting a rising of the next serial
1
2
3
Instruction
High-Z
4
Figure 13 WRSR Operation
2
5
PROM FOR AUTOMOTIVE ELECTRIC COMPONENT
Seiko Instruments Inc.
6
High / Low
7
8
b7
9
Inputs Data in the Status Register
b6
10
b5
11
b4
12
b3
13
b2
14
b1
15
b0
Rev.1.0
16
Protect
_00