rt9245c Richtek Technology Corporation, rt9245c Datasheet - Page 23
![no-image](/images/manufacturer_photos/0/5/567/richtek_technology_corporation_sml.jpg)
rt9245c
Manufacturer Part Number
rt9245c
Description
Multi-phase Controller Core Power Supply
Manufacturer
Richtek Technology Corporation
Datasheet
1.RT9245C.pdf
(25 pages)
Layout Guide
Place the high-power switching components first, and separate them from sensitive nodes.
1. Most critical path: the current sense circuit is the most sensitive part of the converter. The current sense
2. Switching ripple current path:
3. MOSFET driver should be closed to MOSFET.
4. The compensation, bypass and other function setting components should be near the IC and away from the noisy
DS9245C-02 March 2007
resistors tied to CSP1,2,3,4 and CSN should be located not more than 0.5 inch from the IC and away from
the noise switching nodes. The PCB trace of sense nodes should be parallel and as short as possible.
power path.
a. Input capacitor to high side MOSFET.
b. Low side MOSFET to output capacitor.
c. The return path of input and output capacitor.
d. Separate the power and signal GND.
e. The switching nodes (the connection node of high/low side MOSFET and inductor) is the most noisy points.
f. Reduce parasitic R, L by minimum length, enough copper thickness and avoiding of via.
Keep them away from sensitive small-signal node.
R
IN
V
V
IN
C
IN
Figure 32. Power Stage Ripple Current Path
SW2
SW1
L2
L1
V
OUT
C
OUT
RT9245C
R
L
www.richtek.com
23