gs2970a Gennum Corporation, gs2970a Datasheet - Page 2
![no-image](/images/manufacturer_photos/0/2/277/gennum_corporation_sml.jpg)
gs2970a
Manufacturer Part Number
gs2970a
Description
Gs2970a 3gb/s, Hd, Sd Sdi Receiver Complete With Smpte Audio And Video Processing
Manufacturer
Gennum Corporation
Datasheet
1.GS2970A.pdf
(4 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
gs2970a-IBE3
Manufacturer:
GENNUM
Quantity:
20 000
Part Number:
gs2970aIBTE3
Manufacturer:
GENNUM
Quantity:
20 000
Description
The GS2970A is a multi-rate SDI Receiver which includes
complete SMPTE processing, as per SMPTE 425M, 292M and
SMPTE 259M-C. The SMPTE processing features can be
bypassed to support signals with other coding schemes.
The device features an Integrated Reclocker with an
internal VCO and a wide Input Jitter Tolerance (IJT) of 0.7UI.
A serial digital loop through output is provided, which can
be configured to output either reclocked or non-reclocked
serial digital data. The serial digital output can be connected
to an external cable driver.
The device operates in one of four basic modes: SMPTE
mode, DVB-ASI mode, Data-Through mode or Standby
mode.
In SMPTE mode (the default operating mode), the GS2970A
performs full SMPTE processing, and features a number of
data integrity checks and measurement capabilities.
The device also supports ancillary data extraction, and can
provide entire ancillary data packets through
host-accessible registers. It also provides a variety of other
packet detection and error handling features. All of these
processing features are optional, and may be individually
enabled or disabled through register programming.
Both SMPTE 425M Level A and Level B inputs are supported
with optional conversion from Level B to Level A for 1080p
50/59.94/60 4:2:2 10-bit inputs.
In DVB-ASI mode, sync word detection, alignment and
8b/10b decoding is applied to the received data stream.
GS2970A 3Gb/s, HD, SD SDI Receiver complete with
SMPTE Audio and Video Processing
Product Brief
55976 - A
SD/HD/3G-SDI
SD/HD/3G-SDI
Application: Multi-format Audio De-embedder Module
Application: Multi-format Digital VTR/Video Server
Equalizer
Gennum
Equalizer
Gennum
September 2010
GS2970A
GS2970A
Audio Clocks
HV F /P CLK
AUDIO 1/ 2
AUDIO 3/ 4
AUDIO 5/ 6
AUDIO 7/ 8
20-bit
Audio Clocks
AUDIO 1/ 2
AUDIO 3/ 4
AUDIO 5/ 6
AUDIO 7/ 8
10-bit
P CLK
Audio Outputs
Processor
Processor
V ideo Output
Switch
Drivers
Video
Audio
Logic
GS2962
&
DAC
Tape/HDD/Solid State
SD/HD/3G-SDI
Storage:
AES
Audio
Outputs
Analog
Audio
Outputs
In Data-Through mode, all forms of SMPTE and DVB-ASI
decoding are disabled, and the device can be used as a
simple serial to parallel converter.
The device can also be placed in a lower power Standby
mode. In this mode, no signal processing is carried out and
the parallel output is held static.
Parallel data outputs are provided in 20-bit or 10-bit format
for 3Gb/s, HD and SD video rates, with a variety of mapping
options. As such, this parallel bus can interface directly with
video processor ICs, and output data can be multiplexed
onto 10 bits for a low pin count interface.
Up to eight channels (two audio groups) of serial digital
audio may be extracted from the video data stream, in
accordance with SMPTE 272M-C and SMPTE 299M.
The output audio formats supported by the device include
AES/EBU and I
digital formats. A variety of audio processing features are
provided to ease implementation. Audio clocks are
internally generated and provided by the device.
2
C, and two other industry standard serial
2 of 4