as5304 austriamicrosystems, as5304 Datasheet

no-image

as5304

Manufacturer Part Number
as5304
Description
Integrated Hall Ics For Linear And Off-axis Rotary Motion Detection
Manufacturer
austriamicrosystems
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
as5304-ATSU
Manufacturer:
AMS
Quantity:
1 001
Part Number:
as5304A
Manufacturer:
AMS
Quantity:
20 000
Part Number:
as5304A-ATSM
Manufacturer:
AMS
Quantity:
101
Part Number:
as5304A-ATST
Manufacturer:
AMS
Quantity:
1 001
Part Number:
as5304A-ATSU
Manufacturer:
AMS
Quantity:
101
Part Number:
as5304B-ATST
Manufacturer:
AMS
Quantity:
101
1
The AS5304/AS5306 are single-chip IC’s with integrated
Hall elements for measuring linear or rotary motion using
multi-pole magnetic strips or rings.
This
applications where the Sensor IC cannot be mounted at the
end of a rotating device (e.g. at hollow shafts). Instead, the
AS5304/AS5306 are mounted off-axis underneath a multi-
pole magnetized ring or strip and provides a quadrature
incremental output with 40 pulses per pole period at
speeds of up to 20 meters/sec (AS5304) or 12 meters/sec
(AS5306).
An single index pulse is generated once for every pole pair
at the Index output.
Using, for example, a 32pole-pair magnetic ring, the
AS5304/AS5306
pulses/rev, which is equivalent to 5120 positions/rev or
12.3bit. The maximum speed at this configuration is 9375
rpm.
The pole pair length is 4mm (2mm north pole / 2mm south
pole) for the AS5304, and 2.4mm (1.2mm north pole /
1.2mm south pole) for the AS5306. The chip accepts a
magnetic field strength down to 5mT (peak).
Both
(AS530xA) or with open drain outputs (AS530xB).
The AS5304/AS5306 are available in a small 20-pin
TSSOP package and specified for an operating ambient
temperature of -40° to +125°C.
Revision 1.0
AS5304 / AS5306
Integrated Hall ICs for
Linear and Off-Axis Rotary Motion Detection
General Description
Figure 1: AS5304 (AS5306) with multi-pole ring magnet.
allows
chips
are
the
can
usage
available
provide
of
with
the
a
resolution
push-pull
AS5304/AS5306
of
outputs
www.austriamicrosystems.com
1280
in
2
3
4
The AS5304/AS5306 is ideal for high speed linear motion
and off-axis rotation measurement in applications such as
Figure 2: AS5306 (AS5304) with magnetic multi-pole strip magnet
Complete system-on-chip
High reliability due to non-contact sensing
Suitable for the use in harsh environments
Robust against external magnetic stray fields
High speed, up to 20m/s (AS5304)
Magnetic pole pair length: 4mm (AS5304) or
Resolution: 25µm (AS5304) or 15µm (AS5306)
40 pulses / 160 positions per magnetic period.
1 index pulse per pole pair
Linear
Circular off-axis movement measurement using multi-
4.5 to 5.5V operating voltage
Magnetic field strength indicator, magnetic field alarm
electrical motors
X-Y-stages
rotation knobs
industrial drives
magnetic strips
pole magnetic rings
for end-of-strip or missing magnet
Benefits
Key Features
Applications
movement
for linear motion measurement
12m/s (AS5306)
measurement
PRELIMINARY DATA SHEET
2.4mm (AS5306)
using
Page 1 of 12
multi-pole

Related parts for as5304

as5304 Summary of contents

Page 1

... Instead, the AS5304/AS5306 are mounted off-axis underneath a multi- pole magnetized ring or strip and provides a quadrature incremental output with 40 pulses per pole period at speeds meters/sec (AS5304 meters/sec (AS5306). An single index pulse is generated once for every pole pair at the Index output. ...

Page 2

... Functional Description The AS5304/AS5306 require a multi-pole magnetic strip or ring with a pole length of 2mm (4mm pole pair length) on the AS5304, and a pole length of 1.2mm (2.4mm pole pair length) on the AS5306. The magnetic field strength of the multi-pole magnet should be in the range 60mT at the chip surface. ...

Page 3

... AS5304/AS5306 Integrated Hall IC for linear and off-axis rotary motion detection 6.1 Pin Description Pin Pin Name Pin Type 1 VSS DO_OD 3 VDDP DO_OD 5,12,13, TEST AIO 14,17,18, VDD S 8 IND DO_OD 9,10,11 TEST AIO 15 TEST_GND S 16 VDDA Hall S 20 ZPZmskdis DI PIN Types: ...

Page 4

... AS5304/AS5306 Integrated Hall IC for linear and off-axis rotary motion detection Dimensions mm Symbol Min Typ Max Min 1. 0.05 - 0.15 0.002 A2 0.85 0.90 0.95 0.033 b 0.19 - 0.30 0.007 c 0.09 - 0.20 0.004 D 6.40 6.50 6.60 E 6.20 6.40 6.60 0.244 E1 4.30 4.40 4.50 0.169 e 0.65 K 0° - 8° 0° L 0.50 0.60 0.75 0.019 6.3 Electrical Connection The supply pins VDD, VDDP and VDDA are connected to +5V. Pins VSS and TEST_GND are connected to the supply ground. ...

Page 5

... The magnetic field warning indicator (see 7.1.2) together with the index pulse can be used to indicate a unique home position on a magnetic strip: 1. First the AS5304/06 moves to the end of the strip, until a magnetic field warning is displayed (Index = high, A=B=low) 2. Then, the AS5304/06 moves back towards the strip until the first index position is reached (note: an index position is generated once for every pole pair indicated with : Index = high, A=B= high) ...

Page 6

... The INL (integral non-linearity) is the deviation between indicated position and actual position better than 1LSB for both AS5304 and AS5305, assuming an ideal magnet. Pole length variations and imperfections of the magnet material, which lead to a non-sinusoidal magnetic field will attribute to additional linearity errors. ...

Page 7

... Figure 9: AO output versus AGC, magnetic field strength, magnet-to-IC gap 8.1 Resolution and maximum rotating speed When using the AS5304/ off-axis rotary application, a multi-pole ring magnet must be used. Resolution, diameter and maximum speed depend on the number of pole pairs on the ring. 8.1.1 Resolution The angular resolution increases linearly with the number of pole pairs ...

Page 8

... For linear motion sensing, a multi-pole strip using equally spaced north and south poles is used. The pole length is again fixed at 2.0mm for the AS5304 and 1.2mm for the AS5306. As shown in 8.1.3 above, the sensors can process up to 5000 pole pairs per second, so the maximum travelling speed is: ...

Page 9

... AS5304/AS5306 Integrated Hall IC for linear and off-axis rotary motion detection 9 GENERAL DEVICE SPECIFICATIONS 9.1 ABSOLUTE MAXIMUM RATINGS (NON OPERATING) Stresses beyond those listed under “Absolute Maximum Ratings“ may cause permanent damage to the device ...

Page 10

... AS5304/AS5306 Integrated Hall IC for linear and off-axis rotary motion detection 9 Push/Pull or Open Drain Output Push Pull Mode is set for AS530xA, Open Drain Mode is set for AS530xB versions High Level Output Voltage ...

Page 11

... AS5304/AS5306 Integrated Hall IC for linear and off-axis rotary motion detection 9.6 Magnetic Input Magnetic Pole length L P_FP Magnetic pole pair length T FP Magnetic Amplitude A mag Operating Dynamic Input Range ...

Page 12

... AS5304/AS5306 Integrated Hall IC for linear and off-axis rotary motion detection Contact Headquarters austriamicrosystems AG A 8141 Schloss Premstätten, Austria Phone: +43 3136 500 0 Fax: www.austriamicrosystems.com Copyright Devices sold by austriamicrosystems are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. austriamicrosystems makes no warranty, express, statutory, implied description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement ...

Related keywords