mtsm6300-wh-a Marktech Optoelectronics, mtsm6300-wh-a Datasheet - Page 6

• Manufacturer Part Number: mtsm6300-wh-a
• Description: 0603 Smd Chip Led
• Manufacturer: Marktech Optoelectronics

Precautions in Use:
Reflow Temp/Time:
Storage
Soldering
Cleaning
Packaging
Recommend storage environment
Temperature： 5℃～30℃ (41°F～86°F)
Humidity：
Use within 7 days after opening of sealed vapor/ESD barrier bags.
If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage
time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃
for 24 hours.
Fold the opened bag firmly and keep in dry environment.
Surface condition of this device may change when organic solvents such as
trichloroethylene or acetone were applied.
EIA-481A standard package.
In 8mm tape on 4000 pcs diameter reels sealed in vapor/ESD barrier bags.
Reflow Soldering
Recommend use of upper and lower heater type reflow furnace.
260℃ Max for up to 10 seconds, one time only.
Pre-heat is 150℃ Max for up to 2 minutes Max.
In case of screen-printing, keep metal mask thickness between 0.2mm and 0.3mm.
Avoid using organic solvent.
Recommend ultrasonic method 300W Max.
60% RH Max.
140
～
160
MTSM6300-WH-A
4 °C /SEC.
2 minutes Max.
260 °C MAX.
Time
VER.: 01 Date: 2007/10/04 Page: 5/7
4 °C /SEC.
10 SEC.
0603 SMD CHIP LED