mtfdaac008saa-1a1 Micron Semiconductor Products, mtfdaac008saa-1a1 Datasheet - Page 6

• Manufacturer Part Number: mtfdaac008saa-1a1
• Description: Nand Flash Solid State Drive
• Manufacturer: Micron Semiconductor Products

General Description
Figure 3:
2.5 PDF: 09005aef82cb3bdc / Source: 09005aef82cb3c5e
realssd_flash_drive__2.fm - Rev. B 5/08 EN
Functional Block Diagram
Micron RealSSD solid state drives (SSDs) provide 8GB, 16GB, 32GB, or 64GB of mass
memory storage. They support faster boot and application start-up times and they offer
increased reliability, lower power consumption, and weigh less than standard hard disk
drives (HDDs). They are suitable for a variety of applications, from portable devices,
such as notebook and mobile computers, PDAs, and camcorders, to enterprise solu-
tions, such as servers and workstations.
Micron’s SSDs are compatible with the SATA 1.5 Gb/s standard. Because the drives are
Flash-based, they have no moving parts. The absence of moving parts eliminates many
of the inherent drawbacks of traditional HDDs, enabling the SSD to withstand higher
levels of vibration, shock, temperature, humidity, and altitude.
Micron’s SSD SATA controller provides the SATA 1.5 Gb/s bus interface to the host con-
troller while managing all wear-leveling and bad-block mapping of the NAND Flash
storage element. These SSDs operate at 5V ± 5 percent and are drop-in replacements for
SATA 2.5-inch HDDs. Firmware for the SSD is field-upgradable.
SATA Bus Interface
Controller
SATA
6
Chip Select
Micron Technology, Inc., reserves the right to change products or specifications without notice.
Command
Command
Channel 1
Channel 2
NAND
NAND
NAND
Bus
NAND Data Bus
1
Data Channels
2.5-Inch NAND Flash SSD
2
NAND
Flash
General Description
©2007 Micron Technology, Inc. All rights reserved.
3
4
Advance