ame5248-aevadjl AME, Inc., ame5248-aevadjl Datasheet - Page 4

• Manufacturer Part Number: ame5248-aevadjl
• Description: 1.5mhz, 600ma Synchronous Buck Converter
• Manufacturer: AME, Inc.

n Pin Description
4
AME5248
Pin Number
1
2
3
4
5
AME
Pin Name
FB/OUT
GND
SW
EN
IN
Input Supply Voltage Pin.
Bypass this pin with a capacitor as close to the device as possible
Ground
Tie directly to ground plane.
Enable Control Input.
The enable pin is an active high control. Tie this pin above 1.4V to enable the
device. Tie this pin below 0.4V to shut down the device. In shutdown, all
function are disabled. Do not leave EN pin floating.
FB:Output voltage Feedback input.
Set the output voltage by selecting values for R1 and R2 using: R1 = R2
(V
Connect the ground of the feedback network to an AGND (Analog Ground)
plane which should be tied directly to the GND pin.
OUT:Output Pin
Switch Node Connection to Inductor.
OUT
/0.6V -1)
Synchronous Buck Converter
Pin Description
1.5MHz, 600mA
Rev.A.01