s82y-h10f ETC-unknow, s82y-h10f Datasheet - Page 19
![no-image](/images/no-image-200.jpg)
s82y-h10f
Manufacturer Part Number
s82y-h10f
Description
Switching Power Supply
Manufacturer
ETC-unknow
Datasheet
1.S82Y-H10F.pdf
(21 pages)
Precautions
J MOUNTING
Note: Be careful not to impose any excessive vibration or impact
•
•
•
Provide at least the spaces listed in the following table.
Model
100W,
150W
300W
600W
To improve and maintain the reliability of the Power Supply
over a long period of time, adequate consideration must be
given to heat dissipation.
Mount the Power Supply so that air flow takes place around
the Power Supply. The Power Supply is designed to dissipate
heat through natural air-flow.
It is recommended that the Power Supply be mounted on a
metal plate.
Metal plate
when installing.
*1
30 mm
(1.18)
30 mm
(1.18)
30 mm
(1.18)
Air
*2
50 mm
(1.97)
50 mm
(1.97)
50 mm
(1.97)
*3
20 mm
(0.78)
20 mm
(0.78)
20 mm
(0.78)
*4
20 mm
(0.78)
50 mm
(1.97)
70 mm
(2.76)
*5
20 mm
(0.78)
40 mm
(1.57)
50 mm
(1.97)
•
•
•
•
•
J WIRING PRECAUTIONS
The Power Supply is provided with reinforced insulation between
the primary and secondary terminals. When using the secondary
circuit as an SELV circuit, the circuit connected to the output
terminals and auxiliary function terminals must be a SELV circuit.
Forced-air cooling is recommended.
Don’t expose the product to the direct sunlight.
Be careful not to allow any machining chips or dust into the
product while fabricating mounting plates.
Don’t use the product where fluids, foreign matter, or corro-
sive gases may enter the product.
Provide at least the spaces listed in the following table.
Switching Power Supply
S82H
19