FST-10 GAMEWELL-FCI [Gamewell-FCI by Honeywell], FST-10 Datasheet - Page 2

• Manufacturer Part Number: FST-10
• Description: Duct Housing, 4-wire, less detector head
• Manufacturer: GAMEWELL-FCI [Gamewell-FCI by Honeywell]

Part No.
119-A0400
110-38020
112-30080
138-02006
138-02806
138-02906
252-8GJ2B
252-8GK2B
252-8GL2B
252-8GM2B
252-8GN2B
252-8GP2B
Contact ratings
Alarm initiating contacts:
Auxiliary alarm contacts:
Supervisory contacts:
Power requirements
Max. standby current
Max. alarm current
(Using max. accessories)
Max. alarm current
Functional testing can be performed by one of the
following methods:
2 of 2
(Using no accessories)
• Hold a magnet in the slot marked “Test” on the
housing until the LED lights. Confirm that the
system control unit (if used) alarms properly
and performs all auxiliary functions.
Reset: Place a magnet in the slot marked
“Reset”
Model
DH-60
CPD-7051D
PSD-7155D
RAI-4
RCM-505
RCM-606
FST-2
FST-3
FST-4
FST-6
FST-8
FST-10
ELECTRICAL SPECIFICATIONS
ORDERING INFORMATION
Form A
Form C (2 sets)
Form B
20.4 - 26.4 VAC
.070 A
.160 A
.220 A
Duct Housing, 4-wire, less detector head.
Ionization Detector head
Photoelectric Detector head
Remote Alarm Indicator red LED lights on alarm.
Remote Alarm Indicator/Keyswitch as above except
with added remote test and reset keyswitch
Remote Power/Alarm Indicator/Keyswitch -
as above except has added green “POWER” LED
which is lit during normal conditions.
12-inch Sampling Tube (For ducts less than 1 ft.)
24-inch Sampling Tube (For ducts between 1 and 2 ft.)
48-inch Sampling Tube (For ducts between 3 and 4 ft.)
72-inch Sampling Tube (For ducts between 4 and 6 ft.)
96-inch Sampling Tube (For ducts between 6 and 8 ft.)
120-inch Sampling Tube (For ducts between 8 and 10 ft.)
Description
TESTING
2A @ 30 VAC/VDC (resistive)
10A @ 30 VDC (resistive)
10A @ 277 VAC (resistive)
1/8 HP @ 120 VAC
1/4 HP @ 240 VAC
0.3 A @ 30 VDC (resistive)
0.3 A @ 30 VAC (resistive)
102-132 VAC
.030 A
.040 A
.050 A
• Using the RCM-505 or RCM-606 remote test
unit - Insert the key and turn clockwise to the
“TEST” position and hold until the LED lights.
Reset: Turn the key counterclockwise to the
“Reset” position and hold. The LED will extin-
guish. Turn the key to the normal position and
remove.
204-264 VAC
.020 A
.025 A
.035 A
9020-0369 Rev. H
20-29VDC
.020 A
.060 A
.090 A
Shipping
Weight (lbs)
5.5
2.0
2.0
1.0
1.0
1.0
0.6
1.0
1.2
2.0
3.0
3.5