SD275SA45B SENSITRON [Sensitron], SD275SA45B Datasheet - Page 3

• Manufacturer Part Number: SD275SA45B
• Manufacturer: SENSITRON [Sensitron]

SENSITRON
TECHNICAL DATA
DATA SHEET 4111, REV A
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the
user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other
problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a
value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 West Industry Court
0.275±0.003
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - [e-mail] •
A
0.267±0.003
Figure 1
B
Deer Park, NY 11729-4681
Mechanical Dimensions: In Inches / mm
A, B, C = Ti/Ni/Ag - 30 kÅ minimum.
Bottom side (Cathode) metallization:
B = Ag - 30 kÅ minimum, Figure 1
A = Al - 25 kÅ minimum, Figure 1
Top side(Anode) metallization:
C = Au - 12 kÅ min, Figure 2
B A
H
0.220±0.005
D
[phone] FAX [phone] •
0.0155±0.001
Figure 2
D
H
SD275SA45A/B/C
h
0.011±0.002
h