ilx734k Sony Electronics, ilx734k Datasheet - Page 10

no-image

ilx734k

Manufacturer Part Number
ilx734k
Description
10500 X 3 Pixel Ccd Linear Sensor Color
Manufacturer
Sony Electronics
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
ILX734K
Manufacturer:
ST
Quantity:
7 400
Notes of Handling
1) Static charge prevention
2) Soldering
3) Dust and dirt protection
4) Exposure to high temperatures or humidity will affect the characteristics. Accordingly avoid storage or
6) CCD image sensors are precise optical equipment that should not be subject to mechanical shocks.
CCD image sensors are easily damaged by static discharge. Before handling be sure to take the following
protective measures.
a) Either handle bare handed or use non chargeable gloves, clothes or material. Also use conductive shoes.
b) When handling directly use an earth band.
c) Install a conductive mat on the floor or working table to prevent the generation of static electricity.
d) Ionized air is recommended for discharge when handling CCD image sensor.
e) For the shipment of mounted substrates, use boxes treated for prevention of static charges.
a) Make sure the package temperature does not exceed 80°C.
b) Solder dipping in a mounting furnace causes damage to the glass and other defects. Use a grounded 30W
c) To dismount an imaging device, do not use a solder suction equipment. When using an electric
a) Operate in clean environments.
b) Do not either touch glass plates by hand or have any object come in contact with glass surfaces. Should
c) Clean with a cotton bud and ethyl alcohol if the glass surface is grease stained. Be careful not to scratch
d) Keep in a case to protect from dust and dirt. To prevent dew condensation, preheat or precool when
usage in such conditions.
soldering iron and solder each pin in less then 2 seconds. For repairs and remount, cool sufficiently.
desoldering tool, ground the controller. For the control system, use a zero cross type.
dirt stick to a glass surface, blow it off with an air blower. (For dirt stuck through static electricity ionized
air is recommended.)
the glass.
moving to a room with great temperature differences.
– 10 –
ILX734K

Related parts for ilx734k