SS8047GT31TB SSC [Silicon Standard Corp.], SS8047GT31TB Datasheet - Page 3

• Manufacturer Part Number: SS8047GT31TB
• Description: 2.5V 1A Positive Voltage Regulator
• Manufacturer: SSC [Silicon Standard Corp.]

Rev.2.02 7/6/2004
Definitions
Dropout Voltage
The input/output Voltage differential at which the regu-
lator output no longer maintains regulation against fur-
ther reductions in input voltage. Measured when the
output drops 100mV below its nominal value. Dropout
voltage is affected by junction temperature, load cur-
rent and minimum input supply requirements.
Line Regulation
The change in output voltage for a change in input volt-
age. The measurement is made under conditions of
low dissipation or by using pulse techniques such that
average chip temperature is not significantly affected.
www.SiliconStandard.com
Load Regulation
The change in output voltage for a change in load cur-
rent at constant chip temperature. The measurement is
made under conditions of low dissipation or by using
pulse techniques such that average chip temperature
is not significantly affected.
Maximum Power Dissipation
The maximum total device dissipation for which the
regulator will operate within specifications.
Quiescent Bias Current
Current which is used to operate the regulator chip and
is not delivered to the load.
SS8047
3 of 11