SI2414 SILABS [Silicon Laboratories], SI2414 Datasheet - Page 17

• Manufacturer Part Number: SI2414
• Manufacturer: SILABS [Silicon Laboratories]

Receive Carrier
ITU-T V.90
ITU-T V.34
ITU-T V.32bis
ITU-T V.32
ITU-T V.22, V.22bis/Bell 212A
ITU-T V.21
Bell 103
Carrier Detect (level for ITU-T V.22bis,
V.22, V.21, 212, 103) in Switched Network
Hysteresis
Note: ITU-T V.90
DTE Interface
Line Equalization
Connection Options
Phone Types
Dialing
DTMF Output Level
Pulse Dial Ratio
Ring Cadence
Call Progress Monitor
Notes:
Originate mode
Answer mode
Originate mode
Answer mode
Originate mode
Answer mode
1. Supported on Si2456 only.
2. Supported on Si2456 and Si2433 only.
maintaining connection. They also provide for self-training detection to force disconnect.
1
2
1
, V.34
Item
Table 8. Protocol Characteristics (Continued)
2
, V.32/V.32bis are echo canceling protocols that use signal quality as criteria for
Rev. 0.9
Mark (1650 Hz ±12 Hz) Space (1850 Hz ±12 Hz)
Mark (2225 Hz ±12 Hz) Space (2025 Hz ±12 Hz)
Mark (1270 Hz ±12 Hz) Space (1070 Hz ±12 Hz)
Mark (980 Hz ±12 Hz) Space (1180 Hz ±12 Hz)
EIA/TIA-232-E (ITU-T V.24/V.28/ISO 2110)
Loss of Carrier in ITU-T V.22bis and lower
500 (rotary dial), 2500 (DTMF dial)
On 2 seconds; Off 4 seconds
Si2456/Si2433/Si2414
Acquisition (–43 dBm)
As specified by ITU-T
As specified by ITU-T
Make/Break: 39/61%
Release (–48 dBm)
Automatic Adaptive
CONNECT (rate)
2 dBm minimum
Pulse and Tone
1800 Hz ±7 Hz
1800 Hz ±7 Hz
2400 Hz ±7 Hz
1200 Hz ±7 Hz
NO DIALTONE
Specification
NO CARRIER
NO ANSWER
Per Part 68
RINGING
BUSY
RING
OK
17