pd16-73lf Skyworks Solutions, Inc., pd16-73lf Datasheet - Page 3

• Manufacturer Part Number: pd16-73lf
• Description: Two-way Power Splitter Combiner 1.42-1.66 Ghz
• Manufacturer: Skyworks Solutions, Inc.

Absolute Maximum Ratings
1. When used as a power divider with a 2.0:1 maximum VSWR on all ports.
2. When used as a power combiner with a 2.0:1 maximum VSWR on all ports.
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
Recommended Board Layout
Material is 10 mil FR4
Input power
Input power
Operating temperature
Storage temperature
0.018 Typ.
0.039 Typ.
(1)
(2)
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Characteristic
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
200516 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • June 8, 2006
-65 °C to +15 0°C
-40 °C to +85 °C
1.5 W CW
0.075
0.75 CW
Value
Via 3 Places
0.020 Dia.
0.015 Typ.
SOT-6
(0.15 mm)
(0.00 mm)
Recommended Solder Reflow Profiles
Refer to the
Application Note.
Tape and Reel Information
Refer to the
Tape and Reel Package Orientation”
0.006
0.000
0.014 (0.350 mm)
0.020 (0.51 mm)
Indicator
0.122 (3.10 mm)
0.106 (2.70 mm)
Pin 1
(1.90 mm) Ref.
Pin 1
Pin 6
“Recommended Solder Reflow Profile”
“Discrete Devices and IC Switch/Attenuators
0.074
0.057 (1.45 mm)
0.035 (0.90 mm)
0.022 (0.61 mm)
0.004 (0.10 mm)
0.037 (0.95 mm) Ref.
5.0° ± 1°
DATA SHEET • PD16-73LF
Application Note.
0.071 (1.80 mm)
0.052 (1.30 mm)
5.0° ± 1°
0.126 (3.20 mm)
0.087 (2.20 mm)
(0.30 mm)
0.012
(0.26 mm)
(0.10 mm)
Typ.
0.014
0.004
3