ip178a ETC-unknow, ip178a Datasheet - Page 34

• Manufacturer Part Number: ip178a
• Description: 8-port 10/100 Ethernet Integrated Switch
• Manufacturer: ETC-unknow

EEPROM Register Description (continued)
Preliminary, Specification subject to change without notice
IP178A-DS-P05
Sep. 09, 2002
Transceiver verification register
Testing & verify mode register
05H[15:14]
05H[13]
05H[12]
05H[11]
05H[10]
05H[9]
05H[8]
05H[7:6]
05H[5]
05H[4]
05H[3]
05H[2]
05H[1]
05H[0]
06H[15:7]
06H[6]
06H[5:0]
Offset
Default Value Corresponding Pin
2’b0
9’b0
6’b0
00
0
1
0
0
0
0
0
0
1
0
0
0
0
UPDATE_R4_EN
UTP_DET#
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Reserved
This function is for testing only. The default value must be adopted
for normal operation.
Update_r4_en, Change capability enable
A full duplex port will change its capability to half duplex, if the
remote node works at full duplex and does not support
IEEE802.3x and this function is enabled.
1: enable, 0: disable
This function is for testing only. The default value must be adopted
for normal operation.
This function is for testing only. The default value must be adopted
for normal operation.
This function is for testing only. The default value must be adopted
for normal operation.
This function is for testing only. The default value must be adopted
for normal operation.
This function is for testing only. The default value must be adopted
for normal operation.
This function is for testing only. The default value must be adopted
for normal operation.
This function is for testing only. The default value must be adopted
for normal operation.
Utpdet, UTP detect enable
Fewer FLP will be sent out if cable is unplugged and the function
is enabled.
1: disable, 0: enable
The default value is suggested for normal operation.
This function is for testing only. The default value must be adopted
for normal operation.
This function is for testing only. The default value must be adopted
for normal operation.
This function is for testing only. The default value must be adopted
for normal operation.
Reserved
This function is for testing only. The default value must be adopted
for normal operation.
This function is for testing only. The default value must be adopted
for normal operation.
34
Description
(Advance Version)
IP178A