STV82X6 STMICROELECTRONICS [STMicroelectronics], STV82X6 Datasheet - Page 26

• Manufacturer Part Number: STV82X6
• Description: Multistandard TV Audio Processor and Digital Sound Demodulator
• Manufacturer: STMICROELECTRONICS [STMicroelectronics]

I²S Interface
6
26/95
I²S Interface
A digital stereo input is available for a virtual Dolby source from an external decoder.
A digital stereo output (I²S compatible) is available for routing the demodulated signal or a
converted input audio signal into a Dolby Pro Logic Decoder or an external DAC. The STV82x6 I²S
interface drives the serial bus (SCK, WS, SDO) in Master mode in format 32.fs with a sampling
frequency (f
provided if required for the slave interface.
Both Philips and Sony modes are supported with programmable Word Selection (WS) polarity
(register I2S). By default, all I²S digital outputs are set in high impedance and must be switched to
low impedance via register
A clock system output (SYSCK) is also available for clock peripherals using the same quartz
frequency as the STV82x6. By default, this clock output (identical to the crystal oscillator) is set to
high impedance and must be switched to low impedance via register
S
) of 32 kHz. An additional master clock (MCK) in format 256.fs (f
CTRL
before use.
CTRL
before use.
S
= 8.192 MHz) is
STV82x6