tslg-qr8080a08l ETC-unknow, tslg-qr8080a08l Datasheet - Page 7

• Manufacturer Part Number: tslg-qr8080a08l
• Description: High Power Led - 1w
• Manufacturer: ETC-unknow

www.taitroncomponents.com
Ordering Information
Precautions For Use
1. Over-current-proof
2. Storage
3. Thermal Management
① Do not open moisture proof bag before the products are ready to use.
② Before opening the package, the LEDs should be kept at 30 °C or less and 90%RH or less.
③ The LEDs should be used within a year.
④ After opening the package, the LEDs should be kept at 30 °C or less and 70%RH or less.
⑤ The LEDs should be used within 168 hours (7 days) after opening the package.
⑥ If the moisture absorbent material (silicone gel) has faded away or the LEDs have exceeded the
⑦ Pre-curing treatment: 60±5 °C for 24 hours.
① For maintaining the high flux output and achieving reliability, the series LED package should be
Though the LEDs have conducted ESD protection mechanism, customer must not use the device
in reverse and should apply resistors for extra protection. Otherwise slight voltage shift may cause
enormous current change and burn out failure would happen.
storage time, baking treatment should be performed using the following conditions.
mounted on a metal core printed circuit board (MCPCB) with proper thermal connection to
dissipate approximately 1W of thermal energy under 350mA operation.
TS L G– Q R 8080 – A08L-92-TR70
Lead Free Tape & Reel
7=7˝ reel 0=3k per reel
Dome Top
Red Color
Size in mm
Taitron SMD LED
Factory Location Code
Code of Frame Structure
G-bend
Lead Frame Type
TSLG-QR8080A08L
High Power LED
Page 7 of 9
Rev. A/LL